Animal Crematory Systems: P16 Series 
Since 1962, Shenandoah has built high
quality cremation equipment designed for economical ease of use.
Member of the National Animal Control
Association and International Association of Pet Cemeteries

Discover the advantages of
- high profit cremation
- low cost disposal
Designed for
- veterinary practices
- animal control facilities
- pet cemeteries
- destruction of Type IV pathological waste
U.S. design patent D-261,801
One simple solution to animal carcass disposal 
Environmentally safe
Waste can be destroyed as fast as it accumulates. High temperatures convert
pathological or contaminated waste into sterile ash without offensive smoke or odor.
Convenient
Simply load the incinerator and start the burners by setting the timers. No watching is
required since the timers automatically shut the burners off.
Thorough
Leaves only fine or brittle white ashes. Reduces 400 pounds of Type IV pathological
waste to approximately 20 pounds of sterile residue.
Installation
The P16 must be installed in accordance with local codes and ordinances, subject to
local and state regulatory agencies. Stack test data is available from the distributor for
permit application. If on-site testing is required, it is the responsibility of the
purchaser and can be arranged through the distributor. Outside installation is recommended
with a simple metal roof or three-sided metal shelter. Inside installations may have
special insurance requirements.
Benefits and Features of Shenandoah's P16
Fast, complete,
efficient waste disposal
- Heavy duty ceramic grates allow burning from below.
- Concave refractory bottom acts as a hearth for waste that falls through grate openings.
- Secondary chamber with baffle and insulated connector stacks.
Minimum installation
and start up time
- Factory assembled, aluminized steel jacket lined with high temperature refractory and
firebrick.
- Recorders and other accessory equipment available.
Easy and safe
operation
- Large counter-balanced fill door with electrical lockout.
- Automatic digital timer control system for each burner provides preset burn times and
automatic shut off.
Low energy consumption
levels
- Digital temperature controls maintain temperature, assuring complete combustion while
conserving fuel.
- Choice of fuels: #1 fuel oil, LP or natural gas.
Charging rate
- Up to 800 pounds per ten-hour day of Type IV pathological waste rated at 1,000 BTU's per
pound. Based on batch loading twice daily. Dependent upon reloading regulations.
Additional time may be required for burnout of final charge.
Models
- P16-2GLP-T Propane fired cremation system complete with two burners,
secondary chamber, stack, timer and digital temperature control.
- P16-2GN-T Natural gas fired cremation system complete with two burners,
secondary chamber, stack, timer and digital temperature control.
- P16-2O-T Oil fired cremation system complete with two burners,
secondary chamber, stack, timer and digital temperature control.
Specifications Summary
| Chamber capacity |
16.5 cu. ft., 400 lbs., Type IV waste |
| Chamber dimensions |
26" high, 24 1ž2" wide, 47" long |
| Fill door opening |
24" x 28" x 44" high |
| Height to top of secondary chamber |
8'9" |
| Overall dimensions with stack |
4' x 6 1ž2' x 20' |
| Electrical |
115V 60 Hz. Optional, 220V 50 Hz. for P16-2O-T only |
| Weight |
4200 lbs. |
| Suggested slab size |
without shelter |
8' wide, 10' long, 6" thick |
| |
with shelter |
10' wide, 12' long, 6" thick |
| |
P16-2GLP-T |
P16-2GN-T |
P16-2O-T |
| FUEL CONSUMPTION |
LP |
Natural Gas |
#1 Fuel Oil |
| Upper burner |
4.5 GPH |
415 CFH |
2.5 GPH |
| Lower burner |
3.5 GPH |
316 CFH |
2.5 GPH |
| |
(1.75 GPH*) |
(158 CFH*) |
(1.25 GPH*) |
| APPROXIMATE BTU |
|
|
|
| Upper burner |
414,000 |
415,000 |
325,000 |
| Lower burner |
316,000 |
316,000 |
325,000 |
| *Approximate reduced fuel consumption of lower burner is a
result of burner cycling on and off. |
|